Further information can be found in the section Safety Integrated.
Efficient Infeed TechnologyThe innovative Efficient Infeed Technology is employed in PM250 Power Modules. This technology allows the energy produced by motors operating in generator mode connected to standard converters to be fed back into the supply system. For control cabinets, an additional temperature rise can be avoided and the amount of space required can be reduced due to the fact that components such as braking resistors, braking choppers and line reactors can be eliminated. Further, wiring and engineering costs are significantly reduced. At the same time, energy consumption can be reduced and ongoing operating costs noticeably reduced.
Innovative cooling concept and varnishing of electronic modulesThe new cooling system and varnishing of the electronic modules significantly increases the service life or useful life of the device.
Disposal of all heat losses via an external heat sink
Consequential convection cooling of the Control Unit, electronic modules are not located in the air duct
All cooling air from the fan is directed through the heat sink
Energy efficiencyIntegrated technologies help when optimizing the energy usage of the plant or system referred to the particular application:
Energy-efficient vector control with or without sensors
Automatic flux reduction with V/f ECO mode
Integrated energy saving computer
Further information can be found in the section Energy efficiency.
6ES7288-1SR20-0AA0 | S7-200 SMART,CPU SR20,标准型 CPU 模块,继电器输出,220 V AC 供电,12 输入/8 输出 |
6ES7288-1ST20-0AA0 | |
6ES7288-1SR30-0AA0 | |
6ES7288-1ST30-0AA0 | S7-200 SMART,CPU ST30,标准型 CPU 模块,晶体管输出,24 V DC 供电,18 输入/12 输出 |
6ES7288-1SR40-0AA0 | S7-200 SMART,CPU SR40,标准型 CPU 模块,继电器输出,220 V AC 供电,24 输入/16 输出 |
6ES7288-1ST40-0AA0 | S7-200 SMART,CPU ST40,标准型 CPU 模块,晶体管输出,24 V DC 供电,24 输入/16 输出 |
6ES7288-1SR60-0AA0 | S7-200 SMART,CPU SR60,标准型 CPU 模块,继电器输出,220 V AC 供电,36 输入/24 输出 |
6ES7288-1ST60-0AA0 | S7-200 SMART,CPU ST60,标准型 CPU 模块,晶体管输出,24 V DC 供电,36 输入/24 输出 |
6ES7288-1CR40-0AA0 | S7-200 SMART,CPU CR40,经济型 CPU 模块,继电器输出,220 V AC 供电,24 输入/16 输出 |
6ES7288-1CR60-0AA0 | S7-200 SMART,CPU CR60,经济型 CPU 模块,继电器输出,220 V AC 供电,36 输入/24 输出 |
6ES7288-2DE08-0AA0 | S7-200 SMART,EM DI08,数字量输入模块,8 x 24 V DC 输入 |
6ES7288-2DR08-0AA0 | S7-200 SMART,EM DR08,数字量输出模块,8 x 继电器输出 |
6ES7288-2DT08-0AA0 | S7-200 SMART,EM DT08,数字量输出模块,8 x 24 V DC 输出 |
6ES7288-2DR16-0AA0 | S7-200 SMART,EM DR16,数字量输入/输出模块,8 x 24 V DC 输入/8 x 继电器输出 |
6ES7288-2DT16-0AA0 | S7-200 SMART,EM DT16,数字量输入/输出模块,8 x 24 V DC 输入/8 x 24 V DC 输出 |
6ES7288-2DR32-0AA0 | S7-200 SMART,EM DR32,数字量输入/输出模块,16×24 V DC 输入/16 x 继电器输出 |
6ES7288-2DT32-0AA0 | S7-200 SMART,EM DT32,数字量输入/输出模块,16 x 24 V DC 输入/16 x 24 V DC 输出 |
6ES7288-3AE04-0AA0 | S7-200 SMART,EM AI04,模拟量输入模块,4 输入 |
6ES7288-3AQ02-0AA0 | S7-200 SMART,EM AQ02,模拟量输出模块,2 输出 |
6ES7288-3AM06-0AA0 | S7-200 SMART,EM AM06,模拟量输入/输出模块,4 输入/2 输出 |
6ES7288-3AR02-0AA0 | S7-200 SMART,EM AR02,热电阻输入模块,2 通道 |
6ES7288-3AT04-0AA0 | S7-200 SMART,EM AT04,热电偶输入模块,4 通道 |
6ES7288-5CM01-0AA0 | S7-200 SMART,SB CM01,通信信号板,RS485/RS232 |
6ES7288-5DT04-0AA0 | S7-200 SMART,SB DT04,数字量扩展信号板,2 x 24 V DC 输入/2 x 24 V DC 输出 |
6ES7288-5AQ01-0AA0 | S7-200 SMART,SB AQ01,模拟量扩展信号板,1 x 12 位模拟量输出 |
6ES7288-5BA01-0AA0 | S7-200 SMART,SB BA01,电池信号板,支持普通纽扣电池 |
6AV6648-0BC11-3AX0 | SMART LINE,Smart 700 IE,7 寸,64 K 色真彩显示,集成以太网接口 |
6AV6648-0BE11-3AX0 | SMART LINE,Smart 1000 IE,10.2 寸,64 K 色真彩显示,集成以太网接口 |
6ES7288-0CD10-0AA0 | S7-200 SMART AC 100-240 V OUTPUT: DC 24 V/3 A |
6ES7288-0ED10-0AA0 | S7-200 SMART AC 100-240 V OUTPUT: DC 24 V/5 A |
6EP1332-1LA10 | SITOP PS207 24 V/4 A 100-240 V AC (110-300 V DC) OUTPUT: 24 V DC/4 A |
6ES7288-3AE08-0AA0 | 模拟量8路输入 |
有关装配 PROFIBUS 必需的总线连接器和电缆的详细资料,见“总线组件”和“SIMATIC工业通信网”。
总线节点有源节点(主控设备)
带 PROFIBUS DP 接口的 S7-300,S7-400,M7-300,MT-400 可编程控制器
带 PROFIBUS DP 接口的 S5-115U/H,S5-135U,S5-155U/H,S5-95U/DP 主可编程控制器
非西门子的可编程控制器(带主控设备接口)
人机接口(HMI)设备
PG 720, PG 740, PG 760 可编程装置/PC机
SINUMERIK 机床控制器
SIMADYN闭环控制系统
其他西门子主站装置或非西门子装置
无源节点(从控设备)
ET 200 分布式 I/O站
S7-200、S7-300 可编程控制器
S5-115U, S5-135U, S5-155U 可编程控制器(带 IM 308-C)
S5-95U/DP 从站可编程控制器(最大 1.5 Mbit/s)
DP/AS-接口链接, DP/DP-Link, DP/PA-Link 总线耦合器
与 PROFIBUS PA 连接的 SITRANS 系列现场装置
现场装置,包括非西门子装置;如驱动装置、阀门、过程控制器和 NC 控制装置。
驱动器 (例如:MICROMASTER, COMBIMASTER, MASTERDRIVES, SIMOREG, SIMADYN, SIMOVERT)
接口模块/软件下表所示为连接到 PROFIBUS DP 现场总线所提供的接口模块和通信模块
- 西门子控制器6ES7288-1SR20-0AA0 2024-11-05
- 西门子模块6ES7288-1ST60-0AA0 2024-11-05
- 西门子模块6ES7288-1SR60-0AA0 2024-11-05
- 西门子模块6ES7288-1ST40-0AA0 2024-11-05
- 西门子模块6ES7288-1SR40-0AA0 2024-11-05
- 西门子模块6ES7288-1ST30-0AA0 2024-11-05
- 西门子模块6ES7288-1ST20-0AA0 2024-11-05
- 西门子模块6ES7288-1SR20-0AA0 2024-11-05
- 西门子6ES7288-1ST60-0AA0 2024-11-05
- 西门子6ES7288-1SR60-0AA0 2024-11-05