西门子控制面板6AV6643-0BA01-1AX0

Door Control Systems for Elevators

See the following PDF for an overview of elevator door controls

The elevator door drive is comprised of a controller and the maintenance-free drive unit, geared motor or gearless EC technology direct drive motor.

Controllers are electronic controllers connected to the power supply either via an internal power supply unit (SIDOOR AT12) or via an external power supply unit (SIDOOR NT40 or SIDOOR Transformer). They are generally connected to the higher-level controller via digital or fieldbus interfaces, and can be configured via a user interface.

The SIDOOR AT12, SIDOOR AT40 and SIDOOR ATE500E controllers can be used to operate horizontally operated cabin and shaft doors at adjustable speeds and accelerations.

The SIDOOR ATD400V controller for rising doors and rolling shutters enables the operation of vertical door systems on elevators at adjustable speeds and accelerations.

Geared motors form the maintenance-free drive unit in the door drive. The geared motors feature DC motors with non-self-locking gearing, and are speed-controlled. The set force and speed limits are not exceeded. The gearless motor (direct drive) is the maintenance-free drive unit of the door drive.

Operation of the named door drives does not require limit switches. The door width and the "OPEN"/"CLOSE" positions are determined automatically.

The power is transmitted by a toothed belt. The toothed belt passes over a deflector pulley and can be fitted with 2 door clutch holders. This enables it to drive both one-sided and centrally-opening doors. The accessories are not included in the scope of supply, see "Additional units".

The products described here (interfaces and tools) support economic cooperation between SIMATIC PCS 7 including SIMATIC BATCH and the following plant information management systems (PIMS):

A plant information management system is suitable for:

The interfaces and tools provide the best possible combination of PI‑System and aspenOne with SIMATIC PCS 7. They feature high flexibility, performance and safety. They also support redundant systems and archive recovery concepts, e.g. in the event of interferences in a connection.

We can additionally offer tailored, scalable support and services for efficient implementation and maintenance of these interfaces and tools. Information on support and services as well as manufacturer declarations are available on request (for contact address, see "Further information").

Interface PI‑CONNECT OPC+

PI-CONNECT OPC+ reads the process variables cyclically from SIMATIC PCS 7 and saves these in the PI long-term archive.

The interface is operated on a separate interface PC on the terminal bus of the SIMATIC PCS 7 process control system, and supports:

The PI-CONNECT OPC+ interface can be used in combination with SIMATIC PCS 7 V8.x and V9.0. It can use the following interfaces for communication with SIMATIC PCS 7: